027-2000-4078 The WaveTrax four-inch Drop Attachment cover snaps onto the four-inch Drop attachment. The cover is designed to protect your fiber cables when transitioning from a horizontal fiber cable run to a vertical application. The cover snaps onto the drop attachment without any hardware. The snap-together WaveTrax raceway system from Amphenol Network Solutions reduces time.
4-INCH DROP ATTACHMENT COVER
CANALETA DE 6 PIES DE LONGITUD: 4X4 6 FOOT SOLID CHANNEL – WAVETRAX 4″ Four-inch WaveTrax Horizontal Trough comes in standard six-foot lengths. The trough can easily be cut to fit your network’s specific application. As a general rule of thumb, support the fiber trough every three to five feet with a bracket either at […]
CANALETA DE 6 PIES DE LONGITUD: 4X4 6 FOOT SOLID CHANNEL – WAVETRAX 4″
Cassette de transición MPO/ LC DE MICROLINK Nuestros cassettes vienen configurados de manera estándar con dos puertos posteriores MPO de 12 fibras cada uno comunicando a 2 X 12 conectores LC en la parte frontal del cassette. Sobre pedidos especiales, es posible utilizar la unidad con un puerto MPO 24 hilos comunicando a los 24 […]
CASSETTES DE TRANSICIÓN MPO/LC
Closet connector housings (CCHs) provide interconnect or cross-connect capabilities between outside plant, riser or distribution cables and opto-electronics. Like other LANscape solutions hardware, the housings accept CCH connector panels. In addition, the housings accept CCH cassettes and CCH modules. From fiber and cable routing and strain relief, to port labeling and termination, these housings reduce […]
CLOSET CONN HOUSING, 2U (F/4 PANELS)
CCH-03U Closet connector housings (CCHs) provide interconnect or cross-connect capabilities between outside plant, riser or distribution cables and opto-electronics. Like other LANscape solutions hardware, the housings accept CCH connector panels. In addition, the housings accept CCH cassettes and CCH modules.From fiber and cable routing and strain relief, to port labeling and termination, these housings reduce […]
CLOSET CONN HOUSING, 3U (F/6 PANELS)
Closet Connector Housing (CCH) four rack units, holds 12 CCH connector panels: Closet connector housings (CCHs) provide interconnect or cross-connect capabilities between outside plant, riser or distribution cables and optoelectronics. Like other LANscape solutions hardware, the housings accept CCH connector panels. In addition, the housings accept CCH cassettes and CCH modules.
CLOSET CONN HOUSING, 4U (F/12 PANELS)
CCH-CS24-E4-P00QE CCH pigtailed splice cassettes enable faster field splicing and easy modular management of connectorization within the housing. The CCH pigtailed splice cassettes are preloaded and prerouted for quick fusion splicing of either individual or ribbon fiber pigtails, using the same spacesaving platform as the standard CCH splice cassette. The pre-routed pigtailed cassettes reduce field […]
CORNING EMPALME CASSETTE CCH SPL CASS, 24F, LC-DUP, OS2, 250UM
CCH-CS24-A9-P00 CCH Pigtailed Splice Cassette 24 F, LC UPC duplex, Single-mode (OS2), single-fiber (250 µm) CCH pigtailed splice cassettes enable faster field splicing and easy modular management of connectorization within the housing. The CCH pigtailed splice cassettes are preloaded and prerouted for quick fusion splicing of either individual or ribbon fiber pigtails, using the same […]
PANEL CCH SPLICE CASSETTE OS2 LOADED PANEL & PIGTAILS, 24F LC-DUPLX CCH-CS24-A9-P00RE
CCH-CP24-A9 The Corning closet connector housing panels (CCH -CP) are offered in a variety of fibre counts for use with LANscape® solutions hardware products for a “one -size – fits -all” approach. Used with factory -installed or field – installable connectors, these panels provide interconnector cross -connect capability in a housing at main cross -connects, […]
PANEL CCH W/12 DUP LC, SM, CERAMIC
CCH-CP12-3C The Corning closet connector housing panels (CCH -CP) are offered in a variety of fibre counts for use with LANscape® solutions hardware products for a “one -size – fits -all” approach. Used with factory -installed or field – installable connectors, these panels provide interconnect or cross -connect capability in a housing at main cross […]
PANEL, W/12 SM SIMPLEX SC, CER
SPH-01P La carcasa de un solo panel de Corning Cable Systems (SPH-01P) es una carcasa rentable para el almacenamiento, protección y terminación de cables de fibra óptica. El SPH-01P acepta paneles de conectores CCH de LANscape Solutions estándar y ofrece protección para el cable de fibra y los conectores para instalaciones de montaje en pared en […]
SINGLE PANEL HOUSING
027-1000-4474 The four-inch 90-degree Up Elbow Cover quickly snaps onto the Up Elbow to protect fiber cables when transitioning from a horizontal cable run to a vertical cable run. The Cover snaps onto the Up Elbow without any special tools or additional hardware. The snap-together WaveTrax raceway system from Amphenol Network Solutions reduces time […]
WAVETRAX 4 90-DEGREE UPSWEEP LID
027-1000-4052 Se usa con el kit de rosca completa (027-1000-4002) para soportar canales de 4 “o 6” directamente sobre la varilla roscad
WAVETRAX 4″ & 6″ CENTER BELOW BRACKET
027-1000-4489 Con el codo de 45 grados WaveTrax, puede girar rápidamente un cable de fibra horizontal para enrutar su fibra de manera segura en la gestión de cables aéreos. El codo se adhiere rápidamente a un canal de fibra de cuatro pulgadas.
WAVETRAX 4″ 45-DEGREE ELBOW
027-2000-4025 The four-inch WaveTrax 90 Degree Elbow Cover attaches onto the four-inch Horizontal Elbow to help protect your fiber cables.
WAVETRAX 4″ 90-DEGREE ELBOW COVER
027-2000-4024 The 90-degree Horizontal Elbow makes a left or right turn in a four-inch fiber raceway system. Each side of the Elbow requires a coupling kit, end cap or drop attachment.
WAVETRAX 4″ 90-DEGREE HORIZONTAL ELBOW
Busca aquí...
Productos Destacados
